![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,157
Thanks: 3,003
Thanked 2,311 Times in 1,099 Posts
|
Really Nice custom machine work... we are proud of your efforts to create a part as close to the original as possible...
Now, did anybody check with LugerDoc (Tom Heller) to see if he doesn't have a big box of these laying around his shop? ![]() BTW, Gun Parts Corporation lists this part as available on their website for $14.90 http://www.gunpartscorp.com/Products/200270.htm
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
|
|
|
|
|
#2 | |
|
User
Join Date: Feb 2010
Location: Tennessee
Posts: 1,149
Thanks: 159
Thanked 664 Times in 318 Posts
|
Quote:
Seriously, there are loops available but they are pulled from parted out guns so supplies will dry up sooner or later. Also, I wanted to make one that's an easier retrofit than an original part that has already been staked and then pulled out. I made mine with chamfered ends to make it easy to install, and they will hopefully look better than a used part as well. I'm not sure if Numrich carries used or repro, but their repros usually suck so I'm not really counting them. ![]() And again, I really wanted to find out how to do it. There's many different guns with missing loops and it's really tedious to make one-offs, so a large part of the process was to get the method nailed down for future projects. I'm not doing it to get rich, I just enjoy tinkering with stuff like this. |
|
|
|
|
| The following member says Thank You to Olle for your post: |
|
|
#3 |
|
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,316
Thanks: 2,768
Thanked 1,000 Times in 735 Posts
|
You have an enormous talent along those lines. All of us that have obsolete firearms NEED people like you that can help us keep our firearms complete.
|
|
|
|
|
|
#4 |
|
Lifer
Lifetime Forum Patron Join Date: Feb 2009
Location: ...on the 'ol Erie Canal...
Posts: 8,208
Thanks: 1,425
Thanked 4,474 Times in 2,343 Posts
|
Olle, I have a similar project on the shelf but it's been sitting because my 1-ton press isn't strong enough. What did you use to press/bend the rod through the first set of dies [pg 2]???
__________________
I like my coffee the way I like my women... ...Cold and bitter...
|
|
|
|
|
|
#5 | |
|
User
Join Date: Feb 2010
Location: Tennessee
Posts: 1,149
Thanks: 159
Thanked 664 Times in 318 Posts
|
Quote:
Beveling sharp edges and polishing the bearing surfaces really helped more than anything, so that's something you might want to try first of all (if you haven't already). Some copper grease might also help. |
|
|
|
|
![]() |
| Tags |
| blivet |
| Thread Tools | |
| Display Modes | |
|
|