Grandpa's gun

[willyboy]

Originally Posted by willyboy

Wow, I'm overwhelmed with all of these responses! I disassembled and reassembled the gun tonight, but haven't cleaned, I ran out of time. I'll be cleaning it soon. I removed the grips and checked them. One of them is obviously wider and seemingly less worn, but it has the same serial number. I did not see a part on it that isn't matching, which surprised me. The magazine is not matching however. One problem I found, is I can't get it the toggle to snap down when the magazine is in. It will release when the mag is released, and then it will will click with the pull of the trigger as normal. Any idea why it might be doing this?

Thanks everyone.

Well, I feel dumb. I couldn't get the toggle to **** when the mag is in, and I realized I was pressing down on the grip safety which kept me from being able to **** the gun. Pulling the toggle back feels pretty stiff and I was wondering if leaving the toggle locked back for a while would help loosen the spring.

Also, if you look really closely at the pictures I posted at the start of this thread, there's a small space just a millimeter or so wide between the toggle mechanism and where the barrel begins. I can clearly see into the chamber area through the space. Any idea what is causing this?

[willyboy]

Can anyone help me with this?