1937 Mauser Luger (S/42)

alanint · 02-21-2012, 08:44 PM

Welcome!

More than likely the sear is not resetting for a following shot. Check the little barrel at the end of the sear bar for free play. Make sure it moves freely and has no excess oil, grease or debris impeding its function. Also check all the recesses around the sear bar for similar issues.

This is more than likely the problem.

Galaxy88 · 02-21-2012, 09:27 PM

Thanks for the fast response. Is it the barrel at the end of the trigger bar?That does move freely.

02-21-2012, 08:44 PM	#1
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Welcome! More than likely the sear is not resetting for a following shot. Check the little barrel at the end of the sear bar for free play. Make sure it moves freely and has no excess oil, grease or debris impeding its function. Also check all the recesses around the sear bar for similar issues. This is more than likely the problem. Last edited by alanint; 02-22-2012 at 05:36 AM.

02-21-2012, 09:27 PM	#2
Galaxy88 User Join Date: Feb 2012 Location: Sault Ste. Marie, MI Posts: 31 Thanks: 0 Thanked 1 Time in 1 Post	S/42 Problem Thanks for the fast response. Is it the barrel at the end of the trigger bar?That does move freely.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode