My .22LR Stoeger Luger

Animal5150 · 02-15-2012, 06:27 PM

what we are looking at is the firing assembly....the spring in question is the coil spring that you see. The instructions say that should the sear bar (the back half is shown on the right side...the piece with the pin attached) can be reinstalled by placing the rearmost pin (theres only 1) under the arm of the coil spring and it shows a diagram.....I assemble it to the diagram and the rear pin jostles loose and falls when i try to attach the front of the sear bar to the trigger.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-15-2012, 06:27 PM	#1
Animal5150 User Join Date: Feb 2012 Posts: 10 Thanks: 3 Thanked 0 Times in 0 Posts	what we are looking at is the firing assembly....the spring in question is the coil spring that you see. The instructions say that should the sear bar (the back half is shown on the right side...the piece with the pin attached) can be reinstalled by placing the rearmost pin (theres only 1) under the arm of the coil spring and it shows a diagram.....I assemble it to the diagram and the rear pin jostles loose and falls when i try to attach the front of the sear bar to the trigger.