A 30 luger 1911 barrel, who can do it?

[sheepherder]

Originally Posted by Rick W.

Kinda interesting about the factory 38 super. I seem to remember 10 for the 30 Luger, and 22 for the 9mm. Not sure what the 38 super is(SAAMI site not available for me) but a WAG would be about 22...

I've never seen a listing...and I can't get into SAAMI site to check either...Members only??? Looks like they sell a book (looking at Google cache)...They want you to join or buy the book??? - Maybe that's why we can't get in???

[sheepherder]

Originally Posted by Rick W.

http://www.saami.org/PubResources/CC...0Automatic.pdf

Ummm...You do know that is for the 32 Automatic, right???

I still can't get in...All I can get is a .PDF of the table of contents...

[sheepherder]

Originally Posted by Rick W.

Rich,

I think the SAAMI site was just down for whatever reason. As you know the 38 auto and the 38 super are semi-rimmed, the spec from the site shows headspace on the rim...

I see the graphic showing the rim, but where is the decimal value of the headspace???

Oh! The X with a circle!!! *.050" min - .070" max*??? They're showing that as inclusive of the rim...Which is .039" to .050"...so headspace would actually be .011" to .020"...As I read their document...

That's more like it...

The Colt Gov't Model does not index on the rim...The barrel hood would interfere...If you check my pics, you'll notice I cut the chamber before milling the liner away around the hood...because I knew that would knock the reamer off center if I cut the liner away first...

If I'm reading the 7.65 Luger PDF correctly, that headspace is .007" - .010"...