Luger won't fire.

coverk · 12-23-2011, 05:11 PM

Bertiii

Is the side plate loose. If so hold it tight against the frame and see if the trigger will release the firing pin. If it is loose there are threads on this sight telling how to tighten the side plate.

If that does not solve your problem it is likely that the trigger lever needs to be adjusted. That needs to be handled by someone like Luger Doc.

Bertiii · 12-23-2011, 06:30 PM

No the side plate does not seem to be loose. I saw some of the posts on loose side plates and did try holding it tight against the frame but the trigger would not release the firing pin. What is involved in trigger lever adjustment

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-23-2011, 05:11 PM	#1
coverk User Join Date: Aug 2011 Location: Central Wisconsin Posts: 34 Thanks: 4 Thanked 5 Times in 5 Posts	Bertiii Is the side plate loose. If so hold it tight against the frame and see if the trigger will release the firing pin. If it is loose there are threads on this sight telling how to tighten the side plate. If that does not solve your problem it is likely that the trigger lever needs to be adjusted. That needs to be handled by someone like Luger Doc.

12-23-2011, 06:30 PM	#2
Bertiii User Join Date: Jul 2011 Posts: 7 Thanks: 10 Thanked 0 Times in 0 Posts	No the side plate does not seem to be loose. I saw some of the posts on loose side plates and did try holding it tight against the frame but the trigger would not release the firing pin. What is involved in trigger lever adjustment