Pistol Not cocking correctly

lugerholsterrepair · 06-23-2011, 01:23 PM

Robert..I purchased two Magazines from MEC-GAR made in Italy,
that stated they were for 9mm/7.65 cal. So now I'm have problems

Luger magazines will accept either .30 or 9MM interchangeably. So they should work although a round that will stand straight up in the mag mouth tells me the feed lips MIGHT be loose/too wide?

Generally speaking the magazine is the first place to look for problems that you are having.

What magazines were giving you good performance?

I don't know but your 1971 6" Intrarms .30cal Luger may not accept a normal Luger magazine..it could be an Interarms design. I know some parts will not interchange on an Interarms with a German Luger like the sideplate?

06-23-2011, 01:23 PM	#2
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,134 Times in 1,439 Posts	Robert..I purchased two Magazines from MEC-GAR made in Italy, that stated they were for 9mm/7.65 cal. So now I'm have problems Luger magazines will accept either .30 or 9MM interchangeably. So they should work although a round that will stand straight up in the mag mouth tells me the feed lips MIGHT be loose/too wide? Generally speaking the magazine is the first place to look for problems that you are having. What magazines were giving you good performance? I don't know but your 1971 6" Intrarms .30cal Luger may not accept a normal Luger magazine..it could be an Interarms design. I know some parts will not interchange on an Interarms with a German Luger like the sideplate? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode