Toggle Won't Lock in the Back Position

FNorm · 11-16-2010, 10:31 AM

The front hole/slot in the mag gets worn and elongates. This is where the mag lock shaft locks it into the gun. A new or different mag usually solves the problem.

FN

ptrickamp222 · 11-22-2010, 11:19 PM

I just purchased a 30 Cal Luger myself. Would not lock back on its own without pushing up also. Original mag with wood bottom. It goes into storage for safe keeping. Try Ambient Outdoors is where I found my Mec Gar Mag. Just got in all the reloading stuff for the 30 cal so it's reloadiing time and figuring out my favorite load. 90 gr lead cast with Unique and SR4756. Good luck with the mag. I would not use the original myself.

11-22-2010, 11:19 PM	#2
ptrickamp222 User Join Date: Oct 2010 Posts: 60 Thanks: 0 Thanked 1 Time in 1 Post	Mec Gar Mag I just purchased a 30 Cal Luger myself. Would not lock back on its own without pushing up also. Original mag with wood bottom. It goes into storage for safe keeping. Try Ambient Outdoors is where I found my Mec Gar Mag. Just got in all the reloading stuff for the 30 cal so it's reloadiing time and figuring out my favorite load. 90 gr lead cast with Unique and SR4756. Good luck with the mag. I would not use the original myself.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-16-2010, 10:31 AM	#1
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	The front hole/slot in the mag gets worn and elongates. This is where the mag lock shaft locks it into the gun. A new or different mag usually solves the problem. FN