Installation of retaining pins...

chromeed · 10-17-2010, 08:49 AM

GT,
I have a 1970's Mauser Parabellum 8" barrel but the Magazine has a round spring like a MEC-GAR, the springs I need are flat. The Mauser spring is much stiffer than the American Eagle.

G.T. · 10-18-2010, 03:35 PM

Hi chromeed, about all we can do at this point is try an fxo mag spring.. it may not be stiff enough, but at least try the Mauser mag as it is, just to see if the stiffer spring is the way to go on it... We might be chasing our tail till we know more.. best to you, til...lat'r...GT

10-18-2010, 03:35 PM	#2
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,542 Thanks: 1,342 Thanked 3,750 Times in 1,021 Posts	springs & things Hi chromeed, about all we can do at this point is try an fxo mag spring.. it may not be stiff enough, but at least try the Mauser mag as it is, just to see if the stiffer spring is the way to go on it... We might be chasing our tail till we know more.. best to you, til...lat'r...GT

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-17-2010, 08:49 AM	#1
chromeed User Join Date: Oct 2010 Location: North Georgia Posts: 81 Thanks: 1 Thanked 27 Times in 9 Posts	GT, I have a 1970's Mauser Parabellum 8" barrel but the Magazine has a round spring like a MEC-GAR, the springs I need are flat. The Mauser spring is much stiffer than the American Eagle.