Norinco 9mm

Vlim · 01-16-2010, 10:09 AM

Yep, as well as that of the 7.65 para / .30 luger version.

Postino:
I've used different back drops for scanning cartridges, the simplest is just a plain piece of paper that I put on top of it (because my scanner has an insert for slide and negative scanning). What also works well is a small white plastic bottle that I cut up so that a U-shaped cover was left over. I put the round on the glass plate, place the U-shaped cover over it and then scan that area. Although it is white, the shadow creates a light grey background.

alvin · 01-16-2010, 10:21 AM

It's good to know, because the booklet did not say the weapon being a pistol or MP38/40 sub. 7,63 Mauser twist is 1/200 RH.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-16-2010, 10:09 AM	#1
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,991 Times in 1,205 Posts	Yep, as well as that of the 7.65 para / .30 luger version. Postino: I've used different back drops for scanning cartridges, the simplest is just a plain piece of paper that I put on top of it (because my scanner has an insert for slide and negative scanning). What also works well is a small white plastic bottle that I cut up so that a U-shaped cover was left over. I put the round on the glass plate, place the U-shaped cover over it and then scan that area. Although it is white, the shadow creates a light grey background.