![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
|
|
#1 |
|
User
Join Date: Jan 2003
Location: South Florida
Posts: 792
Thanks: 0
Thanked 86 Times in 36 Posts
|
Phil,
I am in Stuart, and I would be happy to look at your Luger. Send me an e-mail where I can contact you. jamesegg@bellsouth.net
__________________
The "truth" is a matter of Perception |
|
|
|
|
|
#2 |
|
User
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
|
Your recoil spring may be too weak, use the paper test on the back of your receiver to check this.
If too weak the toggle will hit the rear of the frame too hard stressing the action this causes the toggle to slam forward too hard, when the bullet hits the ramp it jumps/bounces causing a jam Sometimes the stressing causes the front of the toggle to raise enough to not strip a new cartridge from the magazine. a mag that sits low or a well worn gun makes this more likely to happen. hope this helps-> good luck Vern |
|
|
|
|
|
#3 |
|
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Vern:
Thanks for your suggestions. What is the "paper test" you refer to in your post? Thanks, Phil |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|