Simson P08 Replacement Barrels

LTC144 · 03-23-2008, 04:44 PM

Recently purchased a 1918 DWM that has the Simpson replacement barrel as you have described. It has the LP08 front site cut out, the PTV mark, the RC and the Simpson stamp on the barrel. All of the internal numbered parts match as does one of the mags. The bore mark on the bottom of the barrel has a 8.83 with a 4 stamped above it (sorry Don). The rig came from a local Navy WWII vet with a great 1939 holster and one matching mag with a sun burst over k stamp below the serial number.

03-23-2008, 04:44 PM	#3
LTC144 New User Join Date: Mar 2008 Location: SE Michigan Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	1918 DWM w/Simpson Replacement Recently purchased a 1918 DWM that has the Simpson replacement barrel as you have described. It has the LP08 front site cut out, the PTV mark, the RC and the Simpson stamp on the barrel. All of the internal numbered parts match as does one of the mags. The bore mark on the bottom of the barrel has a 8.83 with a 4 stamped above it (sorry Don). The rig came from a local Navy WWII vet with a great 1939 holster and one matching mag with a sun burst over k stamp below the serial number.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode