Sear bar

policeluger · 06-24-2006, 11:14 AM

Lets see if I can help, I have at times on shooter grade Lugers, filed the radius on the frame, where the lever is/was not tight enough to the frame to let the firing pin fire...does it work if you hold by hand the side plate, not locked in place to the reciever, and back it out a few...a hair or two, seeing if the plate is indeed to tight...if you back it off a bit and hear a click from a cocked toggle could be the lever is the issue, perhaps it is the cut of the side of the lever that cams the sear bar plunger....always unloaded gun

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-24-2006, 11:14 AM	#5
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	Lets see if I can help, I have at times on shooter grade Lugers, filed the radius on the frame, where the lever is/was not tight enough to the frame to let the firing pin fire...does it work if you hold by hand the side plate, not locked in place to the reciever, and back it out a few...a hair or two, seeing if the plate is indeed to tight...if you back it off a bit and hear a click from a cocked toggle could be the lever is the issue, perhaps it is the cut of the side of the lever that cams the sear bar plunger....always unloaded gun