Luger Jams Totally Ended

Vboy · 04-09-2006, 02:59 PM

Yes, you have drive out the two pins. The first couple of times I changed the springs, I found this difficult to do. But as I went along it became easier. I think I flattened the point of nail to use as a punch and placed the mag on a piece of wood that had some depressions or hollow areas. I didn't break any of the plastic bottom pieces, although one had previously snapped on its own.

Vboy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-09-2006, 02:59 PM	#6
Vboy User Join Date: Jun 2004 Location: Tennessee Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Yes, you have drive out the two pins. The first couple of times I changed the springs, I found this difficult to do. But as I went along it became easier. I think I flattened the point of nail to use as a punch and placed the mag on a piece of wood that had some depressions or hollow areas. I didn't break any of the plastic bottom pieces, although one had previously snapped on its own. Vboy