1900 AE rear dovetailed site

hqbmw · 01-31-2006, 10:59 PM

BTW, before I forget. I feel certain that the gun has been refinished at some point, but NOT recently. There is too much grip wear for a recent job. Also the gun has a very interesting difference at the extreme bottom of the rear strap. A hole was at one time drilled and then professionally refilled. I am NOT removing the filler, but was told by a trusty collector that I will probably find the hole threaded to install a stock sine 1900s had no stock lug. Just another curve to throw into the blend. Great piece to get those WAGs going.

Jack

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-31-2006, 10:59 PM	#1
hqbmw User Join Date: Jun 2005 Location: Mesa AZ Posts: 228 Thanks: 0 Thanked 0 Times in 0 Posts	BTW, before I forget. I feel certain that the gun has been refinished at some point, but NOT recently. There is too much grip wear for a recent job. Also the gun has a very interesting difference at the extreme bottom of the rear strap. A hole was at one time drilled and then professionally refilled. I am NOT removing the filler, but was told by a trusty collector that I will probably find the hole threaded to install a stock sine 1900s had no stock lug. Just another curve to throw into the blend. Great piece to get those WAGs going. Jack