1911 Colt in 9 mm

AGE · 05-30-2003, 11:13 PM

Thanks John. I goofed and lost the shell that failed to extract. I bent the extractor a little more and slightly relieved the point where the end contacts the slide which should allow it to move inward a tiny bit more (only a few thousandths of an inch). I also ground a slight depression in the end of the slide stop--bullet noses are not the problem. Will continue the story when I shoot it again, hopefully next week sometime.

05-30-2003, 11:13 PM	#16
AGE User Join Date: Jun 2002 Location: Florida Posts: 597 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks John. I goofed and lost the shell that failed to extract. I bent the extractor a little more and slightly relieved the point where the end contacts the slide which should allow it to move inward a tiny bit more (only a few thousandths of an inch). I also ground a slight depression in the end of the slide stop--bullet noses are not the problem. Will continue the story when I shoot it again, hopefully next week sometime. __________________ Al Eggers (AGE) NRA Life Member