Mauser 42 Kriegsmarine Marked Luger

Frank · 01-08-2003, 07:04 AM

Hello John, nice Luger!! Kidvette was absolutely correct regarding the fxo magazines. The magazine should a blue folded metal type with an aluminum bottom and not having a center fastening pin. The acceptance mark on the bottom should be a stick eagle-over-63 (SE/63) or a stick eagle-over-655 (SE/655). Also the serial number should contain a script letter. This appears only in one place, on the frame, below the barrel just under the numbers.

If this letter is between "P" and "W" the magazine markings should not be SE/655

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-08-2003, 07:04 AM	#11
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 166 Times in 87 Posts	Hello John, nice Luger!! Kidvette was absolutely correct regarding the fxo magazines. The magazine should a blue folded metal type with an aluminum bottom and not having a center fastening pin. The acceptance mark on the bottom should be a stick eagle-over-63 (SE/63) or a stick eagle-over-655 (SE/655). Also the serial number should contain a script letter. This appears only in one place, on the frame, below the barrel just under the numbers. If this letter is between "P" and "W" the magazine markings should not be SE/655