Wolf spring problem.

Roadkill · 12-18-2002, 07:32 PM

I'm no expert but I'll offer a suggestion or two. The problem I had was holding the frame and using both hands to insert spring. I screwed three blocks of wood to my workbench to make a template to hold the frame in the right spot and then could use both hands. I used a nail punch to insert in the spring guide, make sure the frame is turned the correct way up. Spring will only go in thru one side. Push it all the way up, check to be sure everything is in place, then rotate the guide and ease it down. Sounds easy, doesn't it?

rk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-18-2002, 07:32 PM	#2
Roadkill User Join Date: Jun 2002 Posts: 1,634 Thanks: 1 Thanked 28 Times in 17 Posts	I'm no expert but I'll offer a suggestion or two. The problem I had was holding the frame and using both hands to insert spring. I screwed three blocks of wood to my workbench to make a template to hold the frame in the right spot and then could use both hands. I used a nail punch to insert in the spring guide, make sure the frame is turned the correct way up. Spring will only go in thru one side. Push it all the way up, check to be sure everything is in place, then rotate the guide and ease it down. Sounds easy, doesn't it? rk