Clark/Thor Heavy Barrel Target Luger

AGE · 01-22-2003, 12:22 AM

Rick,

Can you post some pictures. I like the idea of a shortened S&W sight recessed into the toggle. Perhaps it could be adjusted for elevation by mounting a screw below it at the back end with a relatively large head. This would be accessed through a smaller hole. It could be attached at the front end by a screw similar to the original attachment screw. Then to change elevation, one would loosen the front screw, turn the screw under the sight by reaching through the hole, then tighten the front sight which would also serve as a lock screw.

01-22-2003, 12:22 AM	#10
AGE User Join Date: Jun 2002 Location: Florida Posts: 597 Thanks: 0 Thanked 0 Times in 0 Posts	Rick, Can you post some pictures. I like the idea of a shortened S&W sight recessed into the toggle. Perhaps it could be adjusted for elevation by mounting a screw below it at the back end with a relatively large head. This would be accessed through a smaller hole. It could be attached at the front end by a screw similar to the original attachment screw. Then to change elevation, one would loosen the front screw, turn the screw under the sight by reaching through the hole, then tighten the front sight which would also serve as a lock screw. __________________ Al Eggers (AGE) NRA Life Member

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode