DWM 1915...might snag but...

Evan Duke · 05-14-2003, 10:39 PM

Bob,just about every part on that 1915 luger should have the last 2 digits of the serial number stamped on them.The hold open will be stamped, the inside of the wood grips will be stamped,the under side of the barrel near the frame will have the whole serial number stamped on it.The optional parts may be the magazine release and the firing pin.The magazine should have a wood bottom if it is stamped with the matching number, that is a big +. Hope this helps. Evan

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

05-14-2003, 10:39 PM	#3
Evan Duke User Join Date: Jul 2002 Location: Florida Posts: 52 Thanks: 2 Thanked 7 Times in 3 Posts	Bob,just about every part on that 1915 luger should have the last 2 digits of the serial number stamped on them.The hold open will be stamped, the inside of the wood grips will be stamped,the under side of the barrel near the frame will have the whole serial number stamped on it.The optional parts may be the magazine release and the firing pin.The magazine should have a wood bottom if it is stamped with the matching number, that is a big +. Hope this helps. Evan