Are all mags interchangeable

Lugerdoc · 09-17-2021, 02:19 PM

GT, Thanks for your explanation of luger mag tolerances. As you should have rememored by now: the hole shown on the left side of your VOPO mag and on most other types of PO8 mags, is to allow you to drive out the staked in follower button from the follower for removal. If you find an early type folded tube mag body without the hole, it should have the follower for the SCREW-IN type follower button. I've only run across one of those in 50 years, dealing in luger parts. TH

G.T. · 09-17-2021, 03:05 PM

I also have only ever seen one of the early flat button 1900 mags as well... best, GT

09-17-2021, 02:19 PM	#1
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	GT, Thanks for your explanation of luger mag tolerances. As you should have rememored by now: the hole shown on the left side of your VOPO mag and on most other types of PO8 mags, is to allow you to drive out the staked in follower button from the follower for removal. If you find an early type folded tube mag body without the hole, it should have the follower for the SCREW-IN type follower button. I've only run across one of those in 50 years, dealing in luger parts. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

09-17-2021, 03:05 PM	#2
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,545 Thanks: 1,345 Thanked 3,765 Times in 1,024 Posts	Hi Tom I also have only ever seen one of the early flat button 1900 mags as well... best, GT

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode