New Luger Owner Possibly a "SNEAK"...

DonVoigt · 10-29-2018, 07:28 PM

A trigger pull as light as you describe is not normal, and likely not really safe.
Contact surfaces may be worn, or someone may have given it a "trigger job". Either way it needs attention.

The markings on the frame are workers marks.

Your pin is there, as long as it holds the toggle pin in it is ok.

rhuff · 10-30-2018, 01:27 PM

I have one Luger that did indeed have a very light trigger pull. It was so light that it would "double"/bumpfire. This made me more than a bit uncomfortable, to say the least. It appeared that "Bubba" had shortened the trigger return spring to give it a "trigger job".

I put in a new, correct trigger return spring and the problem was solved. None of my Lugers have light/match trigger pulls......actually, quite the opposite.

10-29-2018, 07:28 PM	#1
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,682 Thanks: 1,443 Thanked 4,356 Times in 2,041 Posts	A trigger pull as light as you describe is not normal, and likely not really safe. Contact surfaces may be worn, or someone may have given it a "trigger job". Either way it needs attention. The markings on the frame are workers marks. Your pin is there, as long as it holds the toggle pin in it is ok. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

10-30-2018, 01:27 PM	#2
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,757 Thanked 999 Times in 734 Posts	I have one Luger that did indeed have a very light trigger pull. It was so light that it would "double"/bumpfire. This made me more than a bit uncomfortable, to say the least. It appeared that "Bubba" had shortened the trigger return spring to give it a "trigger job". I put in a new, correct trigger return spring and the problem was solved. None of my Lugers have light/match trigger pulls......actually, quite the opposite. __________________ Need DWM breechblock #21

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode