Round not consistently extracting

DonVoigt · 10-08-2018, 02:05 PM

Sounds like you may have a dirty, scared, or scored chamber, or the headspace is too short allowing the mouth of the case to stick.

Try cleaning the chamber with a wire brush, and inspect for condition.

The ejector has nothing to do with your extraction problem as you describe it.

mestguy182 · 10-08-2018, 02:10 PM

Quote:

Originally Posted by DonVoigt

Sounds like you may have a dirty, scared, or scored chamber, or the headspace is too short allowing the mouth of the case to stick.

Try cleaning the chamber with a wire brush, and inspect for condition.

The ejector has nothing to do with your extraction problem as you describe it.

Thanks for the info. Even though when I cycle the toggle by hand the spent case comes right out, it could still indicate an issue with the chamber?

10-08-2018, 02:05 PM	#1
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,683 Thanks: 1,443 Thanked 4,358 Times in 2,042 Posts	Sounds like you may have a dirty, scared, or scored chamber, or the headspace is too short allowing the mouth of the case to stick. Try cleaning the chamber with a wire brush, and inspect for condition. The ejector has nothing to do with your extraction problem as you describe it. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode