Erma .22 conversion for P 08; FIRING update post #21

[hayhugh]

Part # 8903 is the part that centers part #8901 into part #8902 then the lock washer and part #8901 holds it all together.

[DonVoigt]

Originally Posted by hayhugh

Part # 8903 is the part that centers part #8901 into part #8902 then the lock washer and part #8901 holds it all together.

If you look at my post and the picture of my pieces,
you will see that they are of the earlier type and not made this way!

The brass taper bushing at the end of the barrel extension in my kit is what centers the barrel in the extension.

Thanks for the help, but the designs of these two are different.