7mm ammo

hayhugh · 07-04-2015, 01:13 PM

Thank you gentlemen, drop of oil eliminates the primer problem and Kinetic hammer ordered with "vise chuck" as the others started at .22 hornet size.

rhuff · 07-04-2015, 03:45 PM

After you remove the bullet with the kinetic puller and dump the powder, the brass neck may still have tension since it was not fired/expanded. Just take your time putting the bullet back into the case neck so as not to damage/bend it. You may have to "bell" the case mouth a little to get the bullet to start into the brass case.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-04-2015, 01:13 PM	#1
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 898 Thanks: 893 Thanked 514 Times in 276 Posts	Thank you gentlemen, drop of oil eliminates the primer problem and Kinetic hammer ordered with "vise chuck" as the others started at .22 hornet size.

07-04-2015, 03:45 PM	#2
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,316 Thanks: 2,762 Thanked 1,000 Times in 735 Posts	After you remove the bullet with the kinetic puller and dump the powder, the brass neck may still have tension since it was not fired/expanded. Just take your time putting the bullet back into the case neck so as not to damage/bend it. You may have to "bell" the case mouth a little to get the bullet to start into the brass case.