Fiocchi Issues

bob2ovi · 06-26-2015, 10:06 AM

Why not use Starline brass. I have used it for a couple of years and have no problems with it.

rhuff · 06-26-2015, 04:06 PM

I just checked the headspace on the Finnish Military 30 Luger ammo that I just purchased. It appears to be on spec @ .661-.662 in. That is encouraging!! Now if it just had Boxer primers, I would be elated at that price point.

sheepherder · 06-26-2015, 05:00 PM

As already noted, the Euro specs are not the same as SAAMI specs...But unfortunately, RCBS, Lee, Pacific, and Clymer all make their products to SAAMI specs...So we're stuck with them...

nukem556 · 06-26-2015, 07:42 PM

Actually, my Lyman dies resize fired brass to .660, so thats ok.

rhuff · 06-27-2015, 02:55 PM

I chucked my RCBS sizing die up in a lathe and did a bit of "tuning" on the base so it would set the shoulder back just a bit more. My reloads now measure 0.670 in. and I am fine with that. My reloads function well in all of my 30 Luger barrels.

P. Octo · 07-11-2015, 12:31 PM

Fired brass from my 06 measured 0.664 at the datum line on the shoulder; unfired brass from Fiocchi, 0.640/650. I set my resizing die to 0.660 and it seems to work. Thanks for the interesting exchange and the diagrams!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-26-2015, 10:06 AM	#1
bob2ovi User Join Date: Oct 2012 Location: Westerville, Ohio Posts: 10 Thanks: 0 Thanked 3 Times in 3 Posts	Why not use Starline brass. I have used it for a couple of years and have no problems with it.

06-26-2015, 04:06 PM	#2
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,757 Thanked 999 Times in 734 Posts	I just checked the headspace on the Finnish Military 30 Luger ammo that I just purchased. It appears to be on spec @ .661-.662 in. That is encouraging!! Now if it just had Boxer primers, I would be elated at that price point.

06-26-2015, 07:42 PM	#4
nukem556 User Join Date: Jul 2010 Location: Irmo, SC Posts: 625 Thanks: 35 Thanked 168 Times in 107 Posts	Actually, my Lyman dies resize fired brass to .660, so thats ok.

06-27-2015, 02:55 PM	#5
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,757 Thanked 999 Times in 734 Posts	I chucked my RCBS sizing die up in a lathe and did a bit of "tuning" on the base so it would set the shoulder back just a bit more. My reloads now measure 0.670 in. and I am fine with that. My reloads function well in all of my 30 Luger barrels.

07-11-2015, 12:31 PM	#6
P. Octo User Join Date: Apr 2015 Location: Cannes, France Posts: 32 Thanks: 20 Thanked 5 Times in 4 Posts	Fired brass from my 06 measured 0.664 at the datum line on the shoulder; unfired brass from Fiocchi, 0.640/650. I set my resizing die to 0.660 and it seems to work. Thanks for the interesting exchange and the diagrams!