Carbine Pictures for Hugh <img BORDER="0" src='http://forum.rennlist.com/luger/pic.gif'>

Ron Wood · 04-16-2002, 02:04 PM

This shows the attachment of the frame extension. As you can see, there is actually a slot milled into the frame for the extension. This gives a lot more purchase area for the silver solder to join the extension to the frame. I have seen an example of a nicely done extension make-up that did not use this slot. If the carbine was ever fired, this "pasted on" extension would surely fail!

http://boards.rennlist.com/upload/Extension.jpg

04-16-2002, 02:04 PM	#2
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,055 Thanks: 1,129 Thanked 5,297 Times in 1,732 Posts	Carbine Picture 2 for Hugh This shows the attachment of the frame extension. As you can see, there is actually a slot milled into the frame for the extension. This gives a lot more purchase area for the silver solder to join the extension to the frame. I have seen an example of a nicely done extension make-up that did not use this slot. If the carbine was ever fired, this "pasted on" extension would surely fail! http://boards.rennlist.com/upload/Extension.jpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode