Need Identification Help

mrerick · 07-31-2013, 09:41 PM

Hi Paul, and welcome to the forum.

The pictures that you are posting don't have enough detail in them. Typically, you should size a photo with at least 1024 pixels of detail along the wide or tall axis.

We need to see the top of your Luger, and photos of all the markings externally visible. You need to check to see if the numbered internal parts match the serial number.

Please ensure that your Luger is unloaded before handing it, and also photograph your empty magazine, including any markings on the base.

I'd also like to see the detail of the inlay that is on each grip... It's quite unusual.

When you take additional photos, use a tripod, and take them in indirect (shaded) sunlight without a flash. Use the closeup setting on your digital camera.

Marc

07-31-2013, 09:41 PM	#5
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,925 Thanks: 1,377 Thanked 3,140 Times in 1,520 Posts	Hi Paul, and welcome to the forum. The pictures that you are posting don't have enough detail in them. Typically, you should size a photo with at least 1024 pixels of detail along the wide or tall axis. We need to see the top of your Luger, and photos of all the markings externally visible. You need to check to see if the numbered internal parts match the serial number. Please ensure that your Luger is unloaded before handing it, and also photograph your empty magazine, including any markings on the base. I'd also like to see the detail of the inlay that is on each grip... It's quite unusual. When you take additional photos, use a tripod, and take them in indirect (shaded) sunlight without a flash. Use the closeup setting on your digital camera. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode