1900 luger firing pin

[sheepherder]

Originally Posted by Karl

Difficult to tell but based on your photo you may have two P-08 firing pins.

Quite possible. After 101 years. Wups! My math is a bit off...111 years.

The M1900 pin has a very different profile (see photo). A P-08 FP will fit in a 1900 Luger...

That P08 firing pin does not go into my 1900 AE breech block. The tail is too thick.

Does your M1900 pin project from the breech block?

Both pins protrude from their breech faces.

I see what you mean about the profile being different (on yours). Mine is a later 1900 AE (serial 13246). Is your 1900 an early one???