Question on 1900 Toggle Slop

[sheepherder]

Originally Posted by Lugerdoc

P, The best way to remove your trigger bar spring missing it's loop, is to manually push in the bar and get a screw driver blade under the spring to hold it above the bar, so that you can get a pliers on it to pull it out.

That's exactly what I did, except I used a brass punch to push the spring out just a bit to prove I could remove it...It's OK this way, but I'd prefer the spring with the tab at the front...

I do have these shorter (than the standard PO8) original TB spring for the M1900 in stock @$20 each. TH

Tom -

The $$$ for the firing pin spring guide/retainer and the TB spring is on the way, with a copy of the prices you quoted me by email. Also going out tomorrow is the additional $$$ for the hold-open spring quote received today.

Thank you for your help!

- Rich B.