New "old" man with lots of questions.

whcoyote · 04-06-2012, 11:18 PM

Pistol No. 1 has had the safety altered. The frame came from a pistol that had an up-position safety originally. That almost certainly means it was originally rust-blued. Notice the milled-out portion in the lower safety position and the remains of "Gesichert" (German for "Safe) still left in this position.

As information, any Luger made by DWM or Erfurt and having a chamber date of 1918 or earlier, or DWM with no date, was originally rust blued. A characteristic of the rust bluing process is that the inside of the frame and the bottoms of the receiver will be in-the-white (not blued) if the finish is original. DWM and Erfurt Lugers are so-marked on the top of the front toggle link.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-06-2012, 11:18 PM	#17
whcoyote User Join Date: May 2008 Location: SW Virginia Posts: 75 Thanks: 0 Thanked 7 Times in 6 Posts	Pistol No. 1 has had the safety altered. The frame came from a pistol that had an up-position safety originally. That almost certainly means it was originally rust-blued. Notice the milled-out portion in the lower safety position and the remains of "Gesichert" (German for "Safe) still left in this position. As information, any Luger made by DWM or Erfurt and having a chamber date of 1918 or earlier, or DWM with no date, was originally rust blued. A characteristic of the rust bluing process is that the inside of the frame and the bottoms of the receiver will be in-the-white (not blued) if the finish is original. DWM and Erfurt Lugers are so-marked on the top of the front toggle link.