41 BYF Matching Luger

FNorm · 06-17-2010, 06:58 PM

Welcome to the forum. The Mauser byf code started in Feb.1941. Serial no. of the 41 ran from 3300n-9950a. So X is right in there. 126,000 made. What inspection stamp is on the right receiver? E/655 or E/135? Could be either wood or plastic grips. About 20% were the black plastic. Mag should be type 4 Army. Blued Extruded Body, Aluminum Concave Center Pinned Body, Stamped fxo, E/37, and a P.08 on the left side of the mag. Some are upside down if you lay the mag on the flat spine. Aluminum first ones, plastic coming in later

FN

06-17-2010, 06:58 PM	#1
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Welcome to the forum. The Mauser byf code started in Feb.1941. Serial no. of the 41 ran from 3300n-9950a. So X is right in there. 126,000 made. What inspection stamp is on the right receiver? E/655 or E/135? Could be either wood or plastic grips. About 20% were the black plastic. Mag should be type 4 Army. Blued Extruded Body, Aluminum Concave Center Pinned Body, Stamped fxo, E/37, and a P.08 on the left side of the mag. Some are upside down if you lay the mag on the flat spine. Aluminum first ones, plastic coming in later FN Last edited by FNorm; 06-17-2010 at 08:08 PM. Reason: deed

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode