ERMA small box 22 conversion.

Mauser George · 12-15-2008, 07:25 PM

Steiner:

The problem is not the firing pin as it goes bang every time I pull the trigger. My problem it jams almost after every shot. I tried just about every brand of ammo I could find.

No gap between the breechblock and barrel and it pulls up snug.

At this point, I have no plans of firing this ERMA conversion in the near future. If something ever broke I would be heartbroken plus the fact it is very frustrating when it jams.

If want to shot a conversion unit, I use my .22LR 1911 Colt Ace or a 9x23 conversion installed on my Colt 1911 9mm and all is well.

Thanks in advance for your help and assistance.

Regards,

George

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-15-2008, 07:25 PM	#8
Mauser George User Join Date: Sep 2008 Location: New York Posts: 88 Thanks: 0 Thanked 2 Times in 2 Posts	Steiner: The problem is not the firing pin as it goes bang every time I pull the trigger. My problem it jams almost after every shot. I tried just about every brand of ammo I could find. No gap between the breechblock and barrel and it pulls up snug. At this point, I have no plans of firing this ERMA conversion in the near future. If something ever broke I would be heartbroken plus the fact it is very frustrating when it jams. If want to shot a conversion unit, I use my .22LR 1911 Colt Ace or a 9x23 conversion installed on my Colt 1911 9mm and all is well. Thanks in advance for your help and assistance. Regards, George