LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Unread 05-25-2008, 01:03 PM   #7
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default

Your getting bullet bounce:

I would try shooting and being very careful not to push up on the magazine from the bottom. This changes the leading edge of the magazine and can cause what your talking about. Also occurs during rapid fire.

It is possible that you have a weak main spring, and that the toggle is rebounding to fast and when the tip of the bullet hits the ramp it bounces up and hangs, but because it only occurs now and then my bet is on your shooting position.

It is also possible that the magazine latch has become worn, this will hold the leading edge lower than normal, so instead of the bullet sliding along the ramp, it hits nose first and then bounces up on its way to the chamber.


You don't have a big problem, it may take trying a few different things to find exactly what is causing the problem. Oh, and of course that means you'll have to shoot it some more

Vern
LugerVern is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com