9mm loads with Clays

cliffdropover1 · 08-13-2014, 01:47 AM

I had a Kimber Solo that no reload would work in. I found that 3.6 grains of Clays would work perfectly in this gun and felt surprisingly light. No signs of excessive pressure. Of course use any advice with caution. I am not responsible for this load. All I know is that it worked very well for me and proved to be remarkably accurate too. Forgot to mention this was for the 124 grain bullet only. I do believe this is the max load even though it felt light.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-13-2014, 01:47 AM	#2
cliffdropover1 User Join Date: Aug 2007 Location: Kentucky Posts: 65 Thanks: 1 Thanked 9 Times in 5 Posts	I had a Kimber Solo that no reload would work in. I found that 3.6 grains of Clays would work perfectly in this gun and felt surprisingly light. No signs of excessive pressure. Of course use any advice with caution. I am not responsible for this load. All I know is that it worked very well for me and proved to be remarkably accurate too. Forgot to mention this was for the 124 grain bullet only. I do believe this is the max load even though it felt light.