Danish made P08 magazines

Chickenthief · 03-07-2017, 04:38 PM

DISA (Dansk Industri Syndikat) Danish Industry Syndicate (Owned by AP Møller) made P08 magazines after WWII.

Several designs.

To USA
P83:
Magazine bottom cast from Silumin with hole for 9mm casing as spring guide.
Follower from cast steel.
Loading lever with criss-cross pattern and stepped edge.
Finish is zinkphosfate/ zink parkerizing.

1952: 10350 pcs to WAC (Western Arms Corporation) in LA
1956: 4000 pcs to WAC in LA
1957: 1000 pcs to PFC in LA (marked "MADE IN DENMARK")
1960: 750 pcs to WAC in LA

P122:
No 9mm case as spring guide in bottom but a proper spring guide in follower.
Follower from cast steel.
Loading lever with criss-cross pattern and no stepped edge.
Magazine body hardned.
Finish is zinkphosfate/ zink parkerizing.

P124 is a P122 with "MADE IN DENMARK" stamped on the bottom.

1960: 350 pcs to JLG in NY (marked "MADE IN DENMARK")
1961: 220 pcs to MEC in Chicago (marked "MADE IN DENMARK")

To UK
P83
1956: 4000 pcs to MOS London
1959: 250 pcs to P H ltd. Birmingham

To Norway
P124
1960 2000 pcs to EW in Oslo (marked "MADE IN DENMARK")
1960 100 pcs to EW in Oslo (marked "MADE IN DENMARK")

To Germany
P83
1960 100 pcs to ??? Hamburg

This info is taken from the order books and delivered quantity might differ slightly.

From the start (1900) the firm was named "Compagnie Madsen" renamed to "Dansk Rekyl Riffel Syndikat" (Danish Recoil Rifle Syndicate) in 1936 (when it was bought by AP Møller) and renamed again to DISA after WWII. Bombed/sabotaged several times during the war as they worked (a litthe to keen) for the Germans.

So some 16670 Danish made P08 magazines were once in time in the US of A.
Sadly many have perished.

This is info i have nicked from a Danish forum and i have no further info to give.
https://www.arma-dania.dk/forum/view...hp?f=36&t=1262

Eugen · 03-07-2017, 05:10 PM

Hmm..over16k floating around the USA. Has anyone seen any of these? I wonder why the comment regarding many have "perished". What caused many to perish?

Chickenthief · 03-07-2017, 05:35 PM

Were non original magazines collectable in the late 1960's-1980's?
Or vere they simply a cheap means of getting some rounds through dads war bring back?
Remember thay were made by a company noone have heard of in a country few could place on the globe.

How many collect MecGar magazines?

rhuff · 03-08-2017, 04:36 PM

I own one P08 mag that is marked "made in Denmark" on the alum(appearing) base. It is a bit different than what is described above, especially on the loading button(multiple circles....not cross hatched). It works like an absolute dream in all of my Lugers. It has a stout mag spring. Body is a grey parkerized type finish with a steel follower. I got it in the early 1970s.

Diver6106 · 03-08-2017, 07:11 PM

I bought a mixed group of Luger magazine bases, about 3 wood and 5 aluminum. The aluminum ones were marked "Made in Denmark." I've been using them to repair older magazines with broken and missing bottoms. They work well.

John Sabato · 03-09-2017, 10:55 AM

Denmark used a lot of captured German equipment after the war to equip their armed forces... Lugers included. I would imagine that the magazines in question were produced locally as replacements.

I have owned them in the past. They have been in my experience some of the better folded sheet metal Luger magazines, very high quality, and as far as function and fit.

But none, including these match the quality, durability, etc. of the FXO type IMHO.

Michael Zeleny · 03-09-2017, 09:17 PM

Quote:

Originally Posted by John Sabato

Denmark used a lot of captured German equipment after the war to equip their armed forces... Lugers included. I would imagine that the magazines in question were produced locally as replacements.

I have owned them in the past. They have been in my experience some of the better folded sheet metal Luger magazines, very high quality, and as far as function and fit.

But none, including these match the quality, durability, etc. of the FXO type IMHO.

The FXO type tends to be tight owing to its construction. Properly hardened folded sheet metal magazines such as MecGar tend to feed a bit more reliably.

LU1900 · 03-12-2017, 07:19 PM

Here one , if that about you talk

03-07-2017, 04:38 PM	#1
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	Danish made P08 magazines DISA (Dansk Industri Syndikat) Danish Industry Syndicate (Owned by AP Møller) made P08 magazines after WWII. Several designs. To USA P83: Magazine bottom cast from Silumin with hole for 9mm casing as spring guide. Follower from cast steel. Loading lever with criss-cross pattern and stepped edge. Finish is zinkphosfate/ zink parkerizing. 1952: 10350 pcs to WAC (Western Arms Corporation) in LA 1956: 4000 pcs to WAC in LA 1957: 1000 pcs to PFC in LA (marked "MADE IN DENMARK") 1960: 750 pcs to WAC in LA P122: No 9mm case as spring guide in bottom but a proper spring guide in follower. Follower from cast steel. Loading lever with criss-cross pattern and no stepped edge. Magazine body hardned. Finish is zinkphosfate/ zink parkerizing. P124 is a P122 with "MADE IN DENMARK" stamped on the bottom. 1960: 350 pcs to JLG in NY (marked "MADE IN DENMARK") 1961: 220 pcs to MEC in Chicago (marked "MADE IN DENMARK") To UK P83 1956: 4000 pcs to MOS London 1959: 250 pcs to P H ltd. Birmingham To Norway P124 1960 2000 pcs to EW in Oslo (marked "MADE IN DENMARK") 1960 100 pcs to EW in Oslo (marked "MADE IN DENMARK") To Germany P83 1960 100 pcs to ??? Hamburg This info is taken from the order books and delivered quantity might differ slightly. From the start (1900) the firm was named "Compagnie Madsen" renamed to "Dansk Rekyl Riffel Syndikat" (Danish Recoil Rifle Syndicate) in 1936 (when it was bought by AP Møller) and renamed again to DISA after WWII. Bombed/sabotaged several times during the war as they worked (a litthe to keen) for the Germans. So some 16670 Danish made P08 magazines were once in time in the US of A. Sadly many have perished. This is info i have nicked from a Danish forum and i have no further info to give. https://www.arma-dania.dk/forum/view...hp?f=36&t=1262

03-07-2017, 05:10 PM	#2
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 756 Thanks: 366 Thanked 594 Times in 313 Posts	Hmm..over16k floating around the USA. Has anyone seen any of these? I wonder why the comment regarding many have "perished". What caused many to perish? __________________ “God created war so that Americans would learn geography.” ― Mark Twain

03-09-2017, 10:55 AM	#6
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,150 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Denmark used a lot of captured German equipment after the war to equip their armed forces... Lugers included. I would imagine that the magazines in question were produced locally as replacements. I have owned them in the past. They have been in my experience some of the better folded sheet metal Luger magazines, very high quality, and as far as function and fit. But none, including these match the quality, durability, etc. of the FXO type IMHO. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

03-12-2017, 07:19 PM	#8
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 900 Thanks: 35 Thanked 461 Times in 193 Posts	Here one , if that about you talk Attached Thumbnails __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

03-07-2017, 05:35 PM	#3
Chickenthief User Join Date: Dec 2016 Location: Denmark Posts: 135 Thanks: 0 Thanked 131 Times in 48 Posts	Were non original magazines collectable in the late 1960's-1980's? Or vere they simply a cheap means of getting some rounds through dads war bring back? Remember thay were made by a company noone have heard of in a country few could place on the globe. How many collect MecGar magazines?

03-08-2017, 04:36 PM	#4
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,270 Thanks: 2,686 Thanked 957 Times in 703 Posts	I own one P08 mag that is marked "made in Denmark" on the alum(appearing) base. It is a bit different than what is described above, especially on the loading button(multiple circles....not cross hatched). It works like an absolute dream in all of my Lugers. It has a stout mag spring. Body is a grey parkerized type finish with a steel follower. I got it in the early 1970s.

03-08-2017, 07:11 PM	#5
Diver6106 User Join Date: Sep 2014 Location: Mt. Vernon VA Posts: 244 Thanks: 1,417 Thanked 117 Times in 75 Posts	I bought a mixed group of Luger magazine bases, about 3 wood and 5 aluminum. The aluminum ones were marked "Made in Denmark." I've been using them to repair older magazines with broken and missing bottoms. They work well.